Corporate Buildings · Overview
Energy cost under control, operations without interruption, and the comfort of your offices — guaranteed.
Most corporate buildings have already invested thousands of dollars in automation, but the systems generate more alarms than any team can work and failures surface late. Keedian connects climate, lighting, and energy —and where it's missing, designs and installs the BMS or the IoT instrumentation—, and turns that signal into prioritized alerts, work orders, and cost and ESG reporting backed by evidence. It applies equally to a whole building or to the floors your company occupies within one.
Expected figures for offices, on HVAC and lighting consumption (not the total bill). Quantified and validated against each portfolio's baseline.
HVAC Comfort & Optimization
- Right setpoints: comfort is defined by your organization, not by each employee.
- Optimized chilled-water production and use — Delta T, run hours, and sequences.
- Comfort and air quality monitored by floor and common area.
Lighting Control & Optimization
- Schedules enforced: after an exception, we revert to the standard automatically.
- Never on at night when it isn't needed.
- Light matched to the building's actual occupancy.
Energy Intelligence
- Consumption and demand monitored to find opportunities and record improvements.
- Equipment faults caught early from the meter.
- Consumption attributed by floor and by tenant.
Multi-equipment monitoring
- The status of every system, from UPS and generators…
- …to climate, vertical transport, lighting, and fire detection.
- We capture the signal, route it to the responsible party, and keep the evidence.
Already have a BMS? We connect to it.
If your building already runs a BMS —Honeywell, Schneider, JCI, Siemens— we read its control points over open protocols (BACnet, Modbus, MQTT, APIs), or with integration engineering when the protocol is closed. The hardware you already paid for keeps working.
No BMS? We design and deploy it.
Keedian designs and executes the optimal solution for your building —from a traditional BMS to low-cost IoT—: instrumentation, controllers, and commissioning, until every floor reports to the platform.
The service is identical either way: same dashboards, same SLA, same operating model. The only difference is where the signal comes from.
Corporate Buildings · Overview
One service, one SLA, one accountability.
You choose how much Keedian operates for you. Each tier includes everything below it.
Run it yourself
- We integrate your BMS or install what's missing: everything connected to Keedian.
- Visibility and remote operation of every building, floor, and zone.
- Your team manages alarms, tickets, and commands.
We operate it for you
- 24/7 monitoring and professional alarm triage.
- Remote resolution first; site visits only when necessary.
- Fewer visits and closure evidence on every case.
Continuous optimization
- Occupancy drives setpoints, ventilation, and dimming.
- Predictive maintenance on critical equipment.
- Verified energy and CO₂e reporting for ESG.
Two transversal layers accompany any tier: an add-ons layer — specialized monitoring of the chiller plant, UPS and generators, vertical transport, and fire detection — and an advisory layer — efficiency engineering, measurement and verification (M&V), ESG reporting, and building-specific SOPs.
Keedian already operates multi-site portfolios at scale. The per-client figures below are validated results in retail; Offices is the segment now rolling out, and its projections build on this operating base.